SPACER PINS
STEEL / metric thread

Material according to DIN 176
Minimum tensile strength
Surface treatment according to DIN 267
Material-Nr. for Steel
11 SMn Pb30
500 N/mm2
zinc plated (A3 F)
1.0718


Model DI Internal-/Internal Thread
Internal Threads Lengths (mm)
 L L1 at
M3 bis M5
L1 to
M6
L1 to
M8
 5 5 5 
 8 8 8 
 10 10 10 
 12 12 12 
 15 15 15 15  
 18 9 9 
 20 10 10 20  
 from 30 10 12 14  
Manufacturing tolerance +/- 0,1 mm
(for SW13 applies DIN 2768-m)
 
STANDARDPROGRAM SPACER PINS / Steel, zinc plated
Available from stock. Delivery times for intermediate lengths and special models on request.
 Order-Nr.Model Material     SW(6-sided) Thread Standard lengths in mm
 DI5.5-M3 x (Length)  DI Steel SW 5,5 M 3 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70
 DI6-M3 x DI Steel SW 6 M 3 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
 DI7-M4 x DI Steel SW 7 M 4 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
 DI8-M4 x DI Steel SW 8 M 4 5, 8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
 DI8-M5 x DI Steel SW 8 M 5     8, 10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
 DI10-M6 x DI Steel SW 10 M 6         10, 12, 15, 18, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100
 DI13-M8 x DI Steel SW 13 M 8                       15,       20, 25, 30, 35, 40, 45, 50,        60,        70,       80,        90,       100

Order-example: DI13-M8 x 30 = DI / St / SW13 / M8 x 30 mm
Site 1 / 2